CMAX Ultimate Coil Spring Kit
Are you ready for a new All Coil Sprung Scale truck build? Here's a really solid setup ready to accept your build and completion. Our new CMAX Combo Kit will let you start a scale represented RC Model build with a full ladder frame, C-channel design, with a Steel geared scale driveline and transfer case, along with EPIC amounts of adjustment.
We've set up this rail set to allow the drivetrain to slide forward and aft a total of over 30mm. The front servo mount adjustment is another 20mm, so you can match up your body and equipment alignment perfectly with NO strength compromise or extra parts.
The Coil spring setups can adjust wheelbases from 250mm up to 370mm on this chassis with simple link length changes.
Scale Motors are available to slide over your 540 size motor Here at this link.
Body and bumper and battery mount options available at our GCM Racing ShapeWays store Here at this link.
Lower Spring cup options are available at our GCM Racing ShapeWays store Here at this link.
This CMAX Ultimate Coil Spring Kit includes all the essence of a Coil Sprung Scale Truck build. In your package you'll find the following items:
Left and Right Chassis Rails, 19.7 inches long
Front Servo Mount
Front Frame Shock Mounts with Coil Bucket
Front 540 size Motor Mount Plate
GCM LowRange Scale Transmission, Steel Gear, 14.3 Gear Ratio
LRT2 Transfer Case, 1.11 Overdrive Front Output
Transfer Case Cross Member
Frame Center Cross Member
Link Mount Chassis Plates
Frame Rear Cross Member/Rear Shock Mount
Rear Frame Shock Mounts with Coil Bucket
Includes All Hex Hardware, 12t Pinion Gear for 1/8 motor shaft, All steel drivetrain gears and shafts, and all aluminum mounts and rails.
To complete this coil spring build, we recommend:
1 CMAX Front Link Kit for your wheel base (in this section)
1 CMAX Rear Link Kit for your wheelbase (in this section)
4 Coil Spring AX31442, (2 bags)
TM8 Axles with Coil Buckets or CMAX Coil Pad kit for your axles (in this section)
Our Favorites for this build:
1. We recommend ECX213000 shocks for this kit, which provide the perfect amount of travel, don't leak, and are already filled with oil. Simply remove the coil spring and spring seats, and install on the truck. Very nice little shocks.
2. We recommend Axial SCX10 shock springs for these spring cups. Many others work as well, but these are very easy to get and have multiple spring rates.
